Hind Actcolor is recommended to be used on concrete
floor which needs to be stain resistant, chemical resistant. It is ideal
for concrete courtyards in Real Estate Project, Industrial floors in
Car manufacturing factory, Pharmaceutical factory, Food product
manufacturing unit, Beverage/Bottling Plants, Dam Power House floors
etc. etc. It offers High performance-high solids-high pigment
loading-Fast drying. It conforms to ASTM D 870 for blistering, adhesion
and discoloration. Passes ASTM D 2795 standards for gasoline and motor oil resistance. It also conforms to abrasion resistance standard as per ASTM D 4060.
♠ Out performs epoxies, urethanes and acrylic floor coating in durability, adhesion and low maintenance cost.
♠ Excellent bonding and chemically reacts with concrete forming a
durable insoluble bond with the substrate that does not peel, flake or
♠ Creates a stronger, more impenetrable and better looking finish
that is dust proof, resistant to staining and deterioration.
♠ Produces a tough trafficable surface for high abuse areas that are subject to light trafficking in 2 hours.
♠ Reduces maintenance, cleaning costs and costly repairs. Only damp mop, machine scrub or recoating is required.
♠ Environmentally friendly, Low VOC content, Non toxic, Non-flammable, Easy water cleanup and Fast-curing.
♠ Maximum performance may take up to 14 days to develop, depending on
temperature and humidity. Do not allow standing water to be left on
|Aspect||Transparent/Colored Aqueous Solution|
|Active Ingredients||100 % of total solids|
|Specific Gravity at 270 C||1.09 0.05|
|pH||11 – 12|
|VOC Content||Less than 50 gms/Ltr.|
|Freeze point||320 F (00 )|
|Taber Abrasion (Weight, 5N.500 RPM)||1.85 g (Mortal, 2.26g)|
|Drying Time||3-5 hours.|
|Depth of Surface Penetration||1-2 mm|
Smooth –troweled concrete treated with Hind Actcolor
coating was tested for stain resistance from various substances. These
compounds were checked at regular intervals upto 24 hours to determine
the amount of penetration/staining after checking with a non-abrasive,
neutral pH cleaner. After cleaning , the stain was evaluated according
to the following scale with ‘0’ indicating no change in the appearance
of the stain and ‘10’ indicating the stain was completely removed.
|SUBSTANCES||30 min||60 mins||90 mins||24 hours|
Hind Actcolor protective coating provides enhanced chemical resistance on the following, but not limited to:
Table I, ACI Standard 302.1R-89 Chemical hardeners can be used to
increase concrete resistance to chemicals including, but not limited to
|Aluminum Sulphate||Lead refining solutions||10% Potassium dichromate||Creosote|
|Ammonium chloride||Potassium per-sulfate||Lignite oils||Cresol|
|Barium hydroxide||Machine oils||Potassium sulfate||Mustard Oil|
|Potassium Sulfate||Beef fat||Magnesium chloride||Nickel sulfate|
|Rapeseed Oil||Calcium nitrate||Magnesium sulfate||Oleic acid 100%|
|Sea Water||Coal tar oils||Manganese sulfate||Olive oil|
|Sodium bromide||Carbon dioxide||Mash, fermenting||Tannic acid|
|Sodium chloride||Carbonic acid||Mercuric chloride||Phosphoric acid, 85%|
|Sodium carbonate||Castor oil||Mercurous chloride||Pickling brine, 10%|
|Cottonseed Oil||Mine waste||Sodium nitrite||Poppy seed oil|
|Potassium aluminum sulfate||Zinc sulfate||Zinc nitrate||Mineral oil|
|Molasses||Sodium thiosulphate||Soybean oil||Sugar|
|Sulfite liquor||Tallow & tallow oil||Phenol, 25%||Walnut oil|
|Tanning liquor, 10%||Tobacco||Zinc chloride||Iodine|
|Lactic acid, 25%||Sodium sulfate,10%||Distillers slop||Ethylene glycol|
|Ferric chloride||Ferric sulfate||Fish oil||Fruit juices|
|Glucose||Glycerin||Hydrogen sulfide, 10%||Potassium carbonate/chloride|
Note: This information contained herein, is to the best our knowledge
and belief, accurate and is to be used as a guide to product selection.
However, since the conditions of handling, installation and use are
beyond our control, we make no guarantee of results.
Special conditions for application: Horizontal masonry & concrete
substrate only. Keep dry for 24 hours after installation. Do not allow
standing water to dwell on surface for 7 days. do not allow traffic
until protective coating surface is completely dry, generally 30 – 60
minutes under typical interior conditions.
APPLICATION PROCEDURES & INSTRUCTIONS
Substrate Preparation: Cement Concrete/Cementitious products
For long term placement create a rough surface profile using diamond
grind about #180 for Clean and neutralization. The surface must be dry,
free of surface containments and in sound condition. Grease and oil
should be removed as per ASTM D 4258-83 and release agents should be removed as per ASTM D 425-88.
Refer to SPC-SP13/NACE No. 6 mechanical or chemical
surface preparation methods for preparing concrete to suitable
cleanliness for intended service. Surface preparation methods should
impart sufficient surface profile for mechanical adhesion to occur.
Ensure surface is thoroughly rinsed and dry prior to preparation and
application. Uneven concrete substrate, scratches and cracks are to be
repaired with polymer mortar to achieve the smoothness. Mask Areas that
do not receive the coating topcoat finish and surface hardener is to be
protected from over spray.
♠ Complete mixing is essential for good product performance. It is
necessary to use a paint-mixing tool mounted on a drill motor or machine
agitation (paint shaker) to mix this paint. Mix well and after mixing
the coating to be applied immediately.
♠ Spray first coat and work in surface with stiff broom or scrubbing pad on a scrubbing machine.
STEPS FOR APPLICATION
At first concrete is to be poured mixed with surface hardener and
allowed to cure for 28 days to achieve the targeted compressive
strength. Secondly application of Hind Actcolor top to be done by rake attached sponge brush. Consumption varies from 0.03 ~ 0.04 Kg/m2 . More than 2-3 hours curing under 200 C
make the surface ready for next coating stage. In case the application
is done in high moisture environment ventilation must be provided to dry
and curing of the coating. The second coat of Hind Actcolor to
be applied by rake attached sponge brush and the consistency of the
coated color to be ensured as like the first coat. Consumption varies
from 0.025 ~ 0.03 Kg/m2 . After curing for 2-3 hours under the same conditions like the first coat the surface becomes ready for application of the Hind Actcolor Sealed coat. The application of the sealed coat is done by the same method and allowed to full cure. Consumption varies from 0.02 ~ 0.25 Kg/m2 . Finally the fully cured surface is polished properly by the floor polishing machine attached with scrubbing pad.
200 ~ 250 m2 / 18 kg ( 0.09kg/m2 ) depending on the porosity of the substrate and the finish.
Routine sweeping, mopping, washing and mechanical scrubbing of floor
with water and neutral pH cleaners (if necessary) are recommended. Water
only is sufficient for most environments.
Note: Do not use cleaners that are acidic or that have citrus(de-limonene) or Butyl compounds. Although Hind Actcolor, coating
is chemically resistant and helps reduce staining, its application in
specific chemical environments and some acidic concentrates, may etch
the surface causing a residual stain. If unsure check with a conversant
concrete technical representative. Regular maintenance and cleaning will
help prolong surface shine. Wipe up any chemical spills as soon as
possible. Always test adhesion and performance for suitability and
desired results before application.
Primary Markets Served
Concrete, Concrete blocks, Food Processing Facilities, Pulp and paper
Mills, Refineries, Material Handling Equipment, Marine/Port Facilities,
Chemical Processing, Waste water treatment facilities , Offshore
Platforms and Heliport.
6 months from the date of manufacture if kept in unopened factory sealed container and stored at 30° C.
In 18 Kg HDPE Container. Available in Green, Red & Light Grey colour shades. On request Transparent, Yellow, Pink & Blue colour shades will be available.
Hind Actcolor is an aqueous Lithium Silicate
solution and alkaline in nature and may cause eye & skin irritation.
Use hand gloves and goggles while applying the same. Avoid ingestion
and prolonged skin contact. If contact with eyes occur wash immediately
with clean water and seek medical advice. At the time of application
workmen should be cautious because Hind Actcolor applied wet surfaces are slippery.