HIGH STRENGTH NON-SHRINK CEMENTITIOUS GROUT
Hind Grout HS (M) is a Ultra High Strength, Free Flowing Non Shrink, and Chloride Free Grout, conforming to BS-1881, Part 116-1983.
Hind Grout HS (M) is used for grouting under the
Bolt Pockets and base plate grouting of all equipments, grouting of
foundation bolts for all types of machinery in cement, textile, paper
& steel industries, bridge bearing pads, columns, precast
Hind Grout HS (M) is an economical and easy to use
material, requiring only addition of water. It is very easy to mix and
placement can be done with high flow characteristic, rapid strength
development, adjustable consistency and Compressive strength of 70N/mm² (7 days)
is achieved. It does not segregate and bleed. It is impact and
vibration resistant, non-corrosive to steel and iron, non-toxic and safe
All grouting areas must be free from the loose concrete, oil, grease, and dust where Hind Grout HS (M) will
be placed. The grouting area to be saturated with water and it is to be
ensured that no stagnant water is present before application. Hind Grout HS (M) Powder
to clean water as per the recommended dosages. Keep on mixing with a
grout or concrete mixer till a smooth and even consistency is achieved.
Mixed grout should be used within 15 minutes of preparation. After
initial hardening of the grout, it should be kept damp either by wet
hessian cloth or with water-ponding for a minimum of seven days. Water
and Powder ratio to be used is 0.13.
25 Kg of the material will yield approximately 12.0
Litre of Fluid Grout and 11.0 Litre of Plastic Grout mix respectively.
Placing conditions including temperature may have to be assessed before
pouring the grout at site. Small trial batches may be tried to ascertain
best working consistency.
|2200 to 2300 Kg/m3
|0.1 to 0.5%
|Compressive Strength at 27 º C (approx)
|70 N/mm²(min) after 7days.
6 months from the date of manufacture in unopened condition. To be stored in a cool and dry covered space away from direct sunlight
25Kg. in Poly lined HDPE Bag.
Hind Grout HS (M) is non-toxic and ingestion is to
be avoided. If contacts with eyes occur, wash well immediately with
water and seek medical advice.